Darkglass Alpha Omega 500 is a 500W amplifier equipped with an all-analog preamplifier, two distinct distortion circuits (Alpha and Omega), a custom-designed Darkglass high-efficiency class D Module, an ultra-quiet graphic equalizer and a digital impulse-response cabinet emulator for DI outputs or headphones.
- 500w amplifier with the signature Darkglass distortion engines
- Cab sim with 3 selectable impulse responses
- Studio-grade 6-band graphic EQ and intelligent compressor
- Expanded connectivity with aux in, headphone output and DI output
- USB connector to load user impulse responses
Alpha Omega 500 takes elements of the most successful Darkglass distortion preamplifier ever and combines them with state-of-the-art features to make a powerful 500-watt amplifier. While the signature Alpha and Omega drive engines add incredible girth and size to the overdriven signal, the studio-grade VCA compressor adds an extra layer of control and the ultra-quiet 6-band graphic equalizer can help sculpt the tone from aggressive and overdriven to crystal clear clean, whatever your needs may be.
A custom-designed Darkglass high-efficiency class D power amplifier module is the heart of this 500 watt amplifier. It enables the usage of speaker cabs with impedance as low as 20, adding a new level of flexibility for your cabinet options. The cabinet simulation utilizes an improved version of the Darkglass Cab Sim module. The module has three slots for hi-res impulse responses, which are active for both the headphone output and the balanced XLR DI output.
- Input 1/4" input: Use this jack to connect your instrument via a standard 1/4" mono cable.
- Passive/Active switch: Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal, making the amp distort early (feel free to use if such additional distortion is desired).
- Distortion switch: Use this push button to the Alpha Omega Engine on or off to add natural compression, organic harmonic enhancement and saturation ranging from mild overdrive to high gain bass rage. The Alpha Omega Engine operates before the clean section, so you can use the 6-band active EQ for additional tone shaping.
- Bite switch: Boosts high mids (2.8kHz) for additional presence and definition.
- Growl switch: Shelving bass boost for a fatter tone and increased low end saturation.
- Comp knob: This controls the amount of dynamic compression added to the Alpha Omega Engine. The make up gain is adjusted automatically. The compression can be turned off or assigned using Darkglass Suite.
- Drive knob: This controls the amount of distortion that the Alpha Omega Engine will deliver. It will change from a soft, warm overdrive to a massive and modern distortion sound.
- Level knob: Use this to control Alpha Omega Engine's output volume.
- Blend knob: Use this to mix between the clean signal and the distortion signal (Alpha Omega Engine).
- Mod knob: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.
- Bass EQ slider: +-12dB at 80Hz. Use this to change the low-end content of the signal.
- Mids EQ sliders: +-12dB at 250, 500, 1.5K and 3Khz. This graphic EQ controls the mid content of the signal.
- Treble EQ slider: +-12dB at 5kHz. Use this to change the high content of the signal.
- Master knob: Use this to control the overall volume of the amplifier.
- Mute switch: Use this push button to mute the amplifier.
- Speaker Output Speakon combo jack: Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or 1/4" speaker cable operation.
- Send 1/4" output: Use this to send the signal to effects pedals.
- Return 1/4" input: Use this to receive the signal from effects pedals. Master volume control is after this input.
- Ground Lift switch: Use this to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal, try changing the setting of this control.
- DI Output XLR output: Use this to send your signal to the console, mic preamp, interface, etc. Both signals are available (bypass and the amp signal with cabinet simulation) and are switched from the cab select switch.
- USB port: The USB connector allows you to use Darkglass Suite to load different cabinet impulses or change different parameters on your amp.
- Headphones 1/4" output: Connect your headphones and enjoy the impulse based cabinet emulation.
- Aux In 1/8" input: Use this connector to provide to the headphone output music from your laptop, cellphone, MP3 player, etc.
- Cab Select switch: Use this to navigate the 3 different cabinet impulses or the clean DI signal.
- Footswitch 1/4" input: Darkglass Intelligent Footswitch (sold separately) is a proprietary, digitally-controlled device that allows you to remotely engage and disengage the Alpha Omega Engine. You can also hold the footswitch to mute the amplifier. The distortion push button will remain operational with Intelligent Footswitch plugged in.
- AC IEC connector: Use this to feed electric power to the amplifier. 100 - 230 VAC, 50Hz-60.
- Power on/off switch: Use this to release the audio energy from your bass.
| SKU | DAR-AO500 |
| MPN | Alpha Omega 500 |
| Vendor | Darkglass Electronics |
| Amp Format | Head |
| Amp Type | Hybrid |
| Included From Manufacturer | Power cord |
| Mpn | AO500 |
| Product Unique Features | Download free Darkglass Suite software to configure the amp, load new impulse responses and install firmware updates |
| Wattage | 500 Watts |
| Amplifier Application | Bass |
| Amplifier Models |
3 slots for impulse response cabinet simulations Impulse responses can be loaded and managed with free Darkglass Suite software |
| Number of Channels | 1 |
| Effects |
Distortion 6-band graphic EQ Impulse response cabinet simulation |
| Effects Loop | Yes |
| Equalization (EQ) | 6-band graphic EQ |
| Footswitch | 1/4" input for Darkglass Intelligent Footswitch (sold separately) |
| Audio Inputs |
1/4" main input 1/8" stereo auxiliary input |
| Audio Outputs |
Speakon / 1/4" combo jack main output Balanced XLR DI output 1/4" headphone output 1/4" effects loop send output |
| Power | 500W |
| Product Weight | 5.29 lb |
| Width | 9.1" |
| Depth | 7.1" |
| Height | 2.8" |
Darkglass Electronics Amplifier Warranty
Darkglass Electronics amplifier products are under warranty to the original owner for a period of three years against manufacturing defects in the country where the product was originally purchased.
If you experience a problem with the unit, please contact Darkglass Electronics to receive a return authorization number or for information on the nearest authorized repair center. A copy of your original receipt must be included with all warranty repairs. You are responsible for all shipping charges. The unit must be shipped to Darkglass Electronics freight prepaid. Darkglass Electronics will return the unit freight collect.
Darkglass Electronics OY is not responsible for shipping damage either to or from its service center. Claims must be filed with the carrier. For repairs, please contact your local dealer or distributor for your country's specific warranty period and repair procedures.
Standard Shipping
-
-
45 Day Return Policy
All Kraft Music orders are protected under our 45 Day Kraft Music Guarantee.
RETURN POLICY -
Price Protection
If you find a better deal than what you see at Kraft Music, let us know! We would love the opportunity to earn your business!
KRAFT GUARANTEE -
Contact Us
Questions? Our expert Sales Advisors are ready to assist you.
800-783-3368
help@kraftmusic.com
YOUR MUSIC TECHNOLOGY STORE SINCE 1984