MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear.
- Unmatched AD converter resolution with a dynamic range of 136 dB
- 2 premium quality mic/line preamps, 2 pristine line/instrument inputs
- 4 line/monitor outputs
- 2 ultra-low impedance headphone outputs with adjustable crossfeed
- ADAT / S/PDIF optical I/O, AES67, MIDI/GPIO
- Two driver outputs per input channel for pre-effects and/or post-effects recording
- Intuitive touchscreen user interface
Fully equipped
MT 48 is ready for the reference-class personal studio: two extremely low-noise mic/line preamps with up to 78 dB gain, two line/instrument inputs, four monitor/line outputs and two superb headphone outputs, each with state-of-the-art AD/DA converters. MT 48's connectivity may be expanded via ADAT / S/PDIF and AES67; a MIDI interface is also integrated. Four separate monitor mixes can be controlled directly on the unit via touchscreen. Onboard processing includes a fully parametric 4-band EQ and a 3-way dynamics processor (gate/compressor/limiter) per channel as well as a high-quality reverb.
Swiss precision inside
MT 48 was developed in close cooperation with Swiss manufacturer Merging Technologies, whose high-precision AD converters offer a staggering dynamic range of 136 dB. This gives MT 48 four times the resolution of comparable audio interfaces.
A new user experience
Despite its enormous scope of features, MT 48 always remains easy to operate. All settings can be made on the device itself via the built-in touchscreen. The perfect monitor mix is just a touch away! Simply use your fingers to adjust pan pots, channel faders and much more without having to switch to mixer software on your computer. MT 48 can even be operated standalone as a mixing console.
Record with or without effects – or both
MT 48 is an audio interface and digital mixing desk in one. You can use its DSP processing for monitoring only, or you can print effects while recording. Or both at the same time! Thanks to unique Dual Output Technology, wet and dry signals can be recorded simultaneously via separate driver channels. So if necessary, you can fall back on an unprocessed backup.
A complete solution
MT 48 leaves nothing to be desired: audio quality at the highest level, built-in DSP processing, comprehensive expandability and convenient operation via touchscreen. MT 48 is the missing link in the Neumann universe, connecting microphones, loudspeakers and headphones to create the perfect studio.
SKU | NEU-MT48S1B |
Vendor | Neumann |
Bus Power | No |
Connectivity | USB-C and MIDI |
Direct Monitoring | Yes |
Included From Manufacturer |
2 × USB-C to USB-C cables USB-C to USB-A cable Power supply |
Max Sample Bit | 192 kHz / 24-bit |
Mic Preamps | 2 |
Midi | In and Out |
MPN | 700259 |
Product Unique Features |
|
Simultaneous Inputs | 12 |
ADAT Expandable | Yes |
Number of Channels | 32 input and 16 output channels at sampling rates up to 48 kHz 16 input and 16 output channels at sampling rates up to 96 kHz 8 input and 16 output channels at sampling rates up to 192 kHz |
Digital Conversion | Up to 192 kHz / 24-bit |
Effects | 3-way dynamics processor (gate/compressor/limiter) per channel Global reverb with send per channel for monitoring purposes, not recorded |
Equalization (EQ) | Fully parametric 4-band equalizer on every channel |
Audio Inputs | 2 × XLR / 1/4" combo mic/line inputs 2 × 1/4" TRS Hi-Z or line inputs |
Audio Outputs | 2 × XLR outputs 2 × balanced 1/4" TRS outputs 2 × 1/4" stereo headphone outputs |
Phantom Power | Switchable 48V phantom power |
Product Weight | 2.09 lb |
Rackmountable | No |
Width | 7.87" |
Depth | 5.04" |
Height | 1.57" |
WARRANTY FOR CONSUMERS FROM THE USA
MANUFACTURER'S LIMITED PRODUCT WARRANTY STATEMENT (US)
The service policies and warranty statements on this page are relevant for all Neumann products. Sennheiser Electronic Corporation (referred to as SEC or Sennheiser for the duration of this document) warrants to the original purchaser that the product purchased will be free of defects related to manufacturing, parts, materials, and workmanship under normal and accepted use. Conditions under which the manufacturer's limited product warranty statement is no longer valid can be found below. Neumann offers a worldwide warranty on its products though it is strongly encouraged that all warranty returns be sent to the customer's local Neumann Authorized Service Center.
This limited product warranty is SEC's only warranty and the customer's only remedy concerning the product. All other representations, warranties or conditions, expressed or implied, written or oral, including but not limited to any warranties or guarantees of merchantability, fitness for a particular purpose, or non-infringement, are expressly excluded. As a result, except as set forth in the previous and following paragraphs, the product is sold "as-is" and the customer is assuming the entire risk as to the product's suitability to their needs, its quality and its performance.
- Neumann Products: 2 Years
- Refurbished Products: Carry the standard warranty**
**Remanufactured product warranties are only valid when purchased from an authorized Neumann reseller.
WARRANTY ELIGIBILITY STATEMENT
In order to be considered eligible for repair or replacement under warranty, included with the repair item(s) must be a valid bill of sale (please see below for more information) from an authorized Neumann retailer detailing the following information:
Retailer's Name
- Original Date of Purchase
- Model or SKU number of the Product Purchased
- Failure to supply a bill of sale with all of the required information will result in denial of warranty repair or replacement.
The following types of documents, printed or electronic, are not considered valid receipts and therefore cannot be used to determine eligibility for warranty:
- Credit Card Statements
- PayPal and/or eBay (or any other auction site) confirmations
- Bank Statements
- Bills of Lading, Bills of Material or any other type of shipping detail document
WARRANTY DOES NOT COVER
Counterfeit or "Grey Market" product or products purchased from any non-authorized Neumann dealer.
Damage or inoperability caused by inadequate repair work performed by the end user or any non-authorized repair center.
Other manufacturer's equipment or reimbursement for said equipment that has been used in conjunction with a Neumann product.
Inoperability due to lack of reasonable maintenance and care as determined by SEC. Accessories or consumable items such as, but not limited to:
- Batteries
- Cable clips
- Foam microphone windscreens
- Cases
Damage: This warranty does not cover any physical and/or electrical damage resulting from, but not limited to:
- Accident
- Misuse
- Abuse
- Malicious destruction
- Acts of nature
- The temporary or permanent affixing of any items supplied or not supplied by the manufacturer with any adhesive, fastener or the like.
- Use of batteries, power supplies or any other sources of power not specifically recommended by the manufacturer.
- Inadequate repair work performed by the end user or any non-authorized repair center.
TERMS AND CONDITIONS
PRODUCT ADVANCE REPLACEMENTS
SEC does not provide advance replacement products.
REFUNDS
SEC will only provide refunds to customers that have purchased product directly from SEC within 30 days from the date of purchase. Customers that purchased product from a Neumann distributor/vendor seeking a refund will have to request reimbursement from the original distributor/vendor.
SHIPPING TO SEC
SEC will be responsible for shipping to the customer after repair/replacement ONLY. The customer is responsible for all shipping/handling charges related to returning the product to SEC or one of the SEC authorized repair facilities. Products must be shipped in their original packaging or otherwise suitably protected to avoid damage during shipping. SEC will not be responsible for any damage incurred during shipment. SEC will only be responsible for packages that are verified as having been received into our warehouse via a shipment tracking number provided by the customer's shipping company.
SHIPPING FROM SEC
All packages will ship within the 50 United States via UPS ground, no signature required, at no expense to the customer. International shipping as well as other shipping methods and options are available; however, all related charges will be the sole responsibility of the customer. Please contact SEC Service Administration at (860) 434-9190 extension #2 for details and pricing.
WARRANTY REPAIRS
In the event that a repair action is performed, SEC will be responsible for all costs associated with the repair including parts and labor costs. All service labor is guaranteed for 90 days or until the conclusion of the originally purchased product's original warranty period, whichever period of time is greater.
WARRANTY REPLACEMENTS
SEC may, at its discretion, choose to replace the product completely with a new or remanufactured product. In the event of product obsolescence, a suitable replacement will be chosen based upon the features, the intended use (according to SEC) and the retail price of the original product. In the event of product obsolescence SEC cannot guarantee the same color or aesthetic attributes as the original product. All warranty replacements are guaranteed for 90 days or until the conclusion of the originally purchased product's original warranty period, whichever period of time is greater.
EXPECTED TURNAROUND TIME
The expected turnaround time is subject to parts and product availability and therefore cannot be guaranteed. For information regarding current turnaround times for warranty repairs and replacements please contact Service Administration at (860) 434-9190 extension #2.
DETERMINING AUTHORITY
The SEC Service Department will be the final determining authority for all potential warranty claims for service and/or replacement.
YOUR MUSIC TECHNOLOGY STORE SINCE 1984